|
Jigging up the oil pump to measure required hose length.
Date: 12/15/2007
Views: 28
|
Display engine being used to measure required hose lengths.
Date: 12/15/2007
Views: 65
|
Date: 12/15/2007
Views: 38
|
Date: 12/15/2007
Views: 42
|
Date: 12/15/2007
Views: 45
|
Water speed and manifold pressure gauges on completed dash.
Date: 12/15/2007
Views: 37
|
|
Nitrous Oxide master arm switch, low oil pressure light, and tachometer.
Date: 12/15/2007
Views: 48
|
Completed cockpit.
Date: 12/15/2007
Views: 38
|
Shaft cover, including the composite shell.
Date: 12/15/2007
Views: 27
|
|
Details of the composite cover. Note the aluminum behind it fits over the aft flange.
Date: 12/15/2007
Views: 29
|
Front lip on the composite shaft cover interface with the firewall.
Date: 12/15/2007
Views: 25
|
Rudder installed (including pitman arm) with water pickup hose visible.
Date: 12/15/2007
Views: 34
|
|
Lubricating the end of an A/N hose fitting, in preparation for hose assembly.
Date: 12/15/2007
Views: 29
|
Fitting held in vise, ready for hose assembly.
Date: 12/15/2007
Views: 26
|
Hose was pushed in back end, and fitting is being screwed in.
Date: 12/15/2007
Views: 23
|
