February 13, 2004
Decking was completed during this work session. Mike and Skip fitted and glued into place the last piece of deck on the boat! Glassing will occur on Saturday (2/20).
Per Mike Hanson's tradition on every boat he has built, the crew either signed or were represented on the last piece of deck to go on the boat.
Dixon finalized the skid fin, drilled the holes in it as well as the boat and confirmed that it fit by jacking up the boat and temporarily bolting it in place. The fin is now off and will be permanently attached in the near future.
The struts are at the plating shop and will be back in the next few weeks. When that occurs the driveline will be aligned and the struts glued in place.
Read MorePer Mike Hanson's tradition on every boat he has built, the crew either signed or were represented on the last piece of deck to go on the boat.
Dixon finalized the skid fin, drilled the holes in it as well as the boat and confirmed that it fit by jacking up the boat and temporarily bolting it in place. The fin is now off and will be permanently attached in the near future.
The struts are at the plating shop and will be back in the next few weeks. When that occurs the driveline will be aligned and the struts glued in place.
